32mm Ø Single Cylinder with Fixed Pin Hole. Suitable for extremely large axles where one cylinder has to control two or more cam arms. Gives approximately 1 1/2 ton thrust per cylinder, at maximum recommended working pressure.
20mm Ø Displacement Cylinder with Slotted Jaw. Suitable for the most popular sizes of cylinders. Can be used on all but the very largest of axles. Gives approximately 1/2 ton thrust per cylinder at maximum recommended working pressure.
20mm Ø Displacement Cylinder The most popular size of cylinder. Can be used on all but the very largest of axles. Gives approximately 1/2 ton thrust per cylinder, at maximum recommended working pressure.
25mm Ø Displacement Cylinder Suitable for extremely large axles or where one cylinder has to control two or more cam arms. Gives approximately 3/4 ton thrust per cylinder, at maximum recommended working pressure.
25mm Ø Displacement Cylinder with Jaw. Suitable for largest axles or where one cylinder has to control two or more cam arms. Gives approximately 3/4 ton thrust per cylinder, at maximum recommended working pressure.
Typ 20'' Luft . 25mm Hydraulik . Umwandlung von nur Luft zu Luft/Hydr. Rückkehr zur „Bremse gelöst“-Position durch Rückholfeder .Max. Betriebsdruck: 8,5 bar-Luft.150 bar Hydr. Versorgungsdruck (Luft): 6,5 bar/8,387 Nm. Betriebstemp. Bereich: -40 °C bis +80 °C
